Single Exhaust Tip
Designed specifically for the early model Cirrus SR22 G1 to divert the hot, corrosive exhaust gases AWAY from the fuselage to prevent structural damage and staining.
Out of stock
Designed specifically for the early model Cirrus SR22 G1 (serial numbers 002-319), our newly STC’d Exhaust Tip diverts the hot, corrosive exhaust gases AWAY from the fuselage to prevent the potential for extensive structural damage to your aircraft and the annoying oily residue from the belly of your plane. Sure to save you lots of back-breaking labor keeping your belly clean too!
FAA STC/PMA approved.
Takes approximately 1/2 hour to install. Installation is included if performed by Aviation Resources.
“Exhaust stains that required scrubbing with bleach have been eliminated, as have concerns about heat damage. Should be a Cirrus Service Bulletin—a definite fix!” Ted Brys, N675N
“If you have a G1 single exhaust, this is “the deal.” I would consider it a “must-have.” I can report that exhaust staining on my bird has been reduced to what I would call minimal to none. Cleaning the belly now takes about 5 minutes versus the 30 minutes it used to take.” Scott Hallock, N224HF
“The Barker Extension should be a mandatory upgrade for all G1 single exhaust Cirrus aircraft.” Jerry Seckler, N1970
|Dimensions||12 × 10 × 6 in|